Are you wondering how to remove a wall mirror that is glued on but not sure how to go about it? We have put together the best guide to help you safely remove it.
Mirrors are beautiful additions to any home. They can be used for decoration, or they can serve as more practical items like a dressing mirror in the bedroom. One of the most common questions that people have, when they decide to remove their wall mirror is how to take it off without damaging the paint or drywall behind it.
This blog post will give you some tips on how to remove a wall mirror that is glued on!
6 Proven Ways On How To Remove A Wall Mirror That Is Glued On
- Find the Best Time to Remove the Mirror
Mirror removal can be a messy task, so it’s important to do it when you have enough time and energy to complete the job.
If possible, try to remove the mirror on a day when you don’t have any other obligations. This will allow you to focus all your attention on the task at hand and avoid any potential accidents.
- Remove all Furniture and Decorations
Remove all furniture and decorations from the area of the mirror. This will help you avoid any accidents while removing the mirror. You don’t want to knock over a lamp or damage your wall while trying to remove the mirror.
Tip: If there is anything behind the mirror that you want to keep, now would be a good time to remove it. The mirror is going to be coming off the wall, so you don’t want to damage it in the process.
- Cover the Floor
Cover your floor with a sheet or plastic tarp to make cleanup easier. Because you will be applying pressure and friction to the glass, you want your work area as clean as possible.
Now that you are prepared, it’s time to get started. Begin by heating up the adhesive with a hairdryer or heat gun. This will help soften it and make it easier to remove.
Once the adhesive is soft, use a putty knife or chisel to wedge under the mirror and pry it off the wall. If you are having trouble getting it started, apply more heat to the adhesive. Be careful not to damage the wall with your tools.
Pro Tip: The heat gun should be set on high, and then you can use the hot air stream to loosen the glue. You will want to hold the gun no closer than four or five inches from the surface of the mirror for about three minutes. When you’re done, you can then use your hands to gently pull off any remaining pieces of glue left over.
- Put on Gloves and Safety Goggles
You must consider safety concerns before working with a large piece of glass. Although you should not break the glass for removal, you should be prepared in case it breaks.
Put on gloves and safety goggles, as well as an appropriate shirt (long sleeves, preferably) for protection against sharp edges of the mirror.
When following the steps on how to remove a wall mirror that is glued on, you should always wear gloves and safety goggles throughout each process. This will keep any possible shards of glass, dust or even fumes from getting into your skin or eyes, possibly causing injury.
- Use Liquid Soap
You can remove a mirror from a wall with liquid dish soap. Apply a generous amount of liquid dish soap around the perimeter of where you want to remove your mirror, then wait about 10 minutes before beginning removal.
Pro Tip: If the mirror is particularly large, it might be helpful to have an extra person help you hold it in place while you remove the adhesive.
- Scraper Tool
It is important to use a scraper tool to gently pry along one edge of your adhesive until the wall mirror starts coming off. For best results, use a scraper that is flat and has a bevelled edge. Make sure you’ve removed all the adhesive by scraping in linear directions.
Tip: Use a scraper tool to gently pry along one edge of your adhesive until it starts coming off.
While removing a mirror glued on the wall can be a very difficult task, it may not be impossible. You simply need to use the right tools and techniques. We hope this guide on how to remove a wall mirror that is glued on has been helpful!